Airmar DT800- 100W Smart Sensor with NMEA2000 connection, 0° Tilt.
The DT800 is a zero degree tilted element that can be tilted up to 7 degrees tilt. Comes with a plastic flange provided by the hull housing. Sensor uses standard PGNs and comes with Micro-C connectors allowing easy connection to an NMEA2000 backbone.
The Airmar DT800 thru hull transducer does not connect directly to a plotter, it must be connected via a backbone. The DT800 is an unobtrusive, retractable, through-hull sensor that accurately calculates depth and temperature data and transmits it to the NMEA 2000® network. Airmar's Smart™ sensors have built-in microelectronics: the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed directly in the sensor itself.
The DT800 is available in three Tilted Element models:
Fixed 20° tilted version for 16° to 24° hull deadrise angles
Fixed 12° tilted version for 8° to 15° hull deadrise angles
Fixed 0° tilted version for 0° to 7° hull deadrise angles
Specifications Airmar DT800- 100W Smart Sensor:
Cable length: 6 m
Data rate: 1X per second
Deadrise range: 0° to 7°
Display connector: N2 Micro
Frequency: 235 kHz
Hole size: 51 mm (2")
Housing material: plastic
Hull material: fiberglass or metal
Max. depth: 0.5 to 183 m
Rated power: 100 W
Conventional single frequency
Temperature accuracy: ±0.5°C (±1.8°F)
Tilt angle: 0°
Transducer functions: depth, temperature
Usable shaft length: 57 mm (2.25")
Voltage: 9 to 16 VDC
Water temperature: -10° to 40°C (14° to 104°F)
Weight: 0.9 kg (0.4 lb)
