The Peplink MAX BR1 IP67 is a rugged industrial 4G LTE router designed for outdoor installations and demanding operating environments.
Its fully enclosed IP67 housing provides protection against dust and water, allowing the router to be installed in locations where a conventional indoor networking device would not be suitable.
The Europe/International version features an integrated LTE Cat 4 cellular modem with redundant dual SIM slots. Two SIM cards can be installed for carrier switching, failover or roaming applications.
Integrated wireless connectivity supports IEEE 802.11b/g/n on 2.4 GHz and can operate as both a WiFi access point and WiFi WAN connection.
A single 10/100 Mbps Ethernet LAN port provides wired connectivity and also supplies power through IEEE 802.3af PoE or 48V Passive PoE. This makes it possible to install the outdoor router using a single Ethernet cable.
LTE, WiFi and GPS antennas are integrated into the weather-resistant enclosure.
Key features
- IP67 water and dust protection
- 4G LTE Cat 4
- Europe/International version
- Redundant dual SIM
- Automatic cellular failover
- WiFi 4 / IEEE 802.11b/g/n
- WiFi WAN and Access Point
- Integrated LTE antennas
- Integrated WiFi antenna
- Integrated GPS antenna
- 1x Fast Ethernet LAN
- IEEE 802.3af PoE
- 48V Passive PoE
- Router throughput up to approx. 100 Mbps
- Recommended for approx. 1-60 users
- -40°C to +65°C operating temperature
- Suitable for outdoor, marine, vehicle and industrial installations
Cellular bands
4G LTE: B1, B3, B7, B8, B20
3G WCDMA/HSDPA/HSUPA/HSPA+/DC-HSPA+: B1, B2, B5, B6, B8
Product specifications
- Product type: industrial outdoor 4G LTE router
- Cellular technology: LTE Cat 4
- Region: Europe / International
- SIM: 2x redundant SIM slots
- Router throughput: up to approx. 100 Mbps
- Ethernet LAN: 1x 10/100 Mbps
- Ethernet WAN: no separate Ethernet WAN port
- WiFi: IEEE 802.11b/g/n
- WiFi generation: WiFi 4
- WiFi frequency: 2.4 GHz
- WiFi modes: Access Point and WiFi WAN
- LTE antennas: integrated
- WiFi antenna: integrated
- WiFi antenna gain: approx. 5 dBi
- Cellular antenna gain: approx. 3 dBi
- GPS: integrated
- Ingress protection: IP67
- Power input: IEEE 802.3af PoE or 48V Passive PoE
- Maximum power consumption: approx. 12 W
- Dimensions: approx. 141 x 162 x 101 mm
- Weight: approx. 680 g
- Operating temperature: -40°C to +65°C
- Humidity: 15-95%, non-condensing
- Certifications: CE, FCC and RoHS
- EMC standard: EN 61000
- Warranty: 1-year limited manufacturer warranty
- Application: outdoor installations, industrial networks, vehicles, marine installations, infrastructure and remote sites
- Included: MAX BR1 IP67 router and ACW-657 waterproof Ethernet connector kit
- Not included: PoE injector or PoE switch, SIM cards, mobile data plan or mounting hardware
- Compatibility advice: check cellular carrier, LTE bands, PoE power source and mounting requirements before ordering
Datasheet Peplink Pepwave MAX BR1 LTE-A.
